Wow its great invasion
Blogged with Flock
One Wheeled Motorcycle claimed as The Zero-Emissions
The Uno’s two wheelchair motors should, theoretically, give it a top speed of 40 mph, but for safety’s sake, Gulak hasn’t taken it above 15 mph yet. “The only way to figure out if an alteration works is to jump on and ride the thing,” he says. “I’m pretty sure I chipped my kneecap in one crash.”
Wow its great invasion
Wow its great invasion
Suzuki SX4 CKD New 2008
The Suzuki SX4 is a compact car developed by Japanese and Italian automakers Suzuki and Fiat and produced since 2006 to replace the Aerio as its compact car. Although originally intended only for the European market, the car is sold in Japan, India, South America, Australia and North America as well. It was introduced at the 2006 Geneva Motor Show and is being built at the Magyar Suzuki plant in Esztergom, Hungary, as well as in Japan. An expected 60,000 units will be produced — 2/3 to be sold by Suzuki and 1/3 by Fiat, rebadged as the Sedici. Design was handled by Giorgetto Giugiaro's Italdesign studio.
Base engines are the 1.5-litre gasoline unit identical to the one used in the Swift and the new 1.6-litre VVT seen in the new Grand Vitara and a 1.6-litre DDIS, this one capable of 107 PS (79 kW). However, the sales bulk will be comprised of the Diesel version, using a sourced Fiat Multijet engine, with a maximum output of 120 PS (88 kW) and maximum torque of 280 N·m (207 ft·lbf).
here are the pictures
The SX4 was initially released with a five-door hatchback body style. A sedan version debuted at the 2007 New York Auto Show and has been released in Japan, India and a few Eastern European markets. It replaced the Suzuki Aerio sedan.
Now it is available in THE MARKET in 5-door hatchback form, fully imported from Japan. The hatchback version is available with both normal low to the ground hatchback styling as well as a crossover-like design incorporating a SUV-like design language and raised ground clearance.
The one we are getting is the crossover design, and under the hood lies a more sedatedly tuned version of the 1.6 liter in the Suzuki Swift Sport. In this incarnation it makes 100 bhp (75kW) at 5,600rpm and 140Nm of torque at 4,000rpm. This is mated to a 4-speed automatic gearbox, and while there are 4X4 versions of the Suzuki SX4 available overseas, we get the 4X2 version which will save some fuel and is more than capable enough for the type of roads this little hatch will tackle anyway. The power steering uses an Electric Power Steering System.
The SX4 ride on MacPherson struts for the front suspension and a torsion beam setup for the rear, and is built on a stretched and modified version of the Suzuki Swift chassis. The large 16 inch wheels with thick profile 205/60R16 tyres complete the crossover look.
Base engines are the 1.5-litre gasoline unit identical to the one used in the Swift and the new 1.6-litre VVT seen in the new Grand Vitara and a 1.6-litre DDIS, this one capable of 107 PS (79 kW). However, the sales bulk will be comprised of the Diesel version, using a sourced Fiat Multijet engine, with a maximum output of 120 PS (88 kW) and maximum torque of 280 N·m (207 ft·lbf).
here are the pictures
The SX4 was initially released with a five-door hatchback body style. A sedan version debuted at the 2007 New York Auto Show and has been released in Japan, India and a few Eastern European markets. It replaced the Suzuki Aerio sedan.
Now it is available in THE MARKET in 5-door hatchback form, fully imported from Japan. The hatchback version is available with both normal low to the ground hatchback styling as well as a crossover-like design incorporating a SUV-like design language and raised ground clearance.
The one we are getting is the crossover design, and under the hood lies a more sedatedly tuned version of the 1.6 liter in the Suzuki Swift Sport. In this incarnation it makes 100 bhp (75kW) at 5,600rpm and 140Nm of torque at 4,000rpm. This is mated to a 4-speed automatic gearbox, and while there are 4X4 versions of the Suzuki SX4 available overseas, we get the 4X2 version which will save some fuel and is more than capable enough for the type of roads this little hatch will tackle anyway. The power steering uses an Electric Power Steering System.
The SX4 ride on MacPherson struts for the front suspension and a torsion beam setup for the rear, and is built on a stretched and modified version of the Suzuki Swift chassis. The large 16 inch wheels with thick profile 205/60R16 tyres complete the crossover look.
Blogged with Flock
The internal combustion engine
Engine of cars, the most of car
The internal combustion engine is an engine in which the combustion of fuel and an oxidizer (typically air) occurs in a confined space called a combustion chamber. This exothermic reaction creates gases at high temperature and pressure, which are permitted to expand. The defining feature of an internal combustion engine is that useful work is performed by the expanding hot gases acting directly to cause movement of solid parts of the engine, by acting on pistons, rotors, or even by pressing on and moving the entire engine itself.here the picture :
This contrasts with external combustion engines, such as steam engines and Stirling engines, which use an external combustion chamber to heat a separate working fluid, which then in turn does work, for example by moving a piston or a turbine.
The term Internal Combustion Engine (ICE) is almost always used to refer specifically to reciprocating piston engines, Wankel engines and similar designs in which combustion is intermittent. However, continuous combustion engines, such as jet engines, most rockets and many gas turbines are also internal combustion engines.
The internal combustion engine is an engine in which the combustion of fuel and an oxidizer (typically air) occurs in a confined space called a combustion chamber. This exothermic reaction creates gases at high temperature and pressure, which are permitted to expand. The defining feature of an internal combustion engine is that useful work is performed by the expanding hot gases acting directly to cause movement of solid parts of the engine, by acting on pistons, rotors, or even by pressing on and moving the entire engine itself.here the picture :
This contrasts with external combustion engines, such as steam engines and Stirling engines, which use an external combustion chamber to heat a separate working fluid, which then in turn does work, for example by moving a piston or a turbine.
The term Internal Combustion Engine (ICE) is almost always used to refer specifically to reciprocating piston engines, Wankel engines and similar designs in which combustion is intermittent. However, continuous combustion engines, such as jet engines, most rockets and many gas turbines are also internal combustion engines.
Blogged with Flock
Superbike race is coming
Here are the first standing position of superbike championship:
1. Y.kagayama (34) Suzuki
2. M. Neukirchner (16) Suzuki
3.
4.
5.R. Xaus (111) Ducati
6. M. Haga (41) yamaha
7.
8.
9.R.kiyonari (23) honda
10. T corser (11) yamaha
11.M Tamada ( 100) Kawasaki
12. S Nakatomi (38) Yamaha
and the racing is still running...........
1. Y.kagayama (34) Suzuki
2. M. Neukirchner (16) Suzuki
3.
4.
5.R. Xaus (111) Ducati
6. M. Haga (41) yamaha
7.
8.
9.R.kiyonari (23) honda
10. T corser (11) yamaha
11.M Tamada ( 100) Kawasaki
12. S Nakatomi (38) Yamaha
and the racing is still running...........
Blogged with Flock
the new 3D dimension elite printer
More detail smaller model.
Now you can get a trip on creating stronger and more detailed working model in no time. The new elite 3d printer used our new ABSPlus tm plastic which produces durable component parts that can be snapped, screwed, and put together right at your desk. it is a great way to save enermous amounts of money and time during critical design stages. it is price 32.000 dolar
Now you can get a trip on creating stronger and more detailed working model in no time. The new elite 3d printer used our new ABSPlus tm plastic which produces durable component parts that can be snapped, screwed, and put together right at your desk. it is a great way to save enermous amounts of money and time during critical design stages. it is price 32.000 dolar
Blogged with Flock
Pro-Lite, Mazda, chevrolet, ford Nissan
cevrolet, mazda, ford, nissan and toyota all supply engine for truck in the prolite class,at a maximum displacement of 2.5 ltr for four valve engines and 2.7 l tr for two valve engines. with this handicaping system, all the competitor engine developed about 300 hp according to kincaid, nissaN claims 305 hp for it's engine, for example
mazda joining the pro lite class for 2008 with crossworth-designed race version of the MZR engine that is used in 2.3 l displacement in champ car atlantic Championship racing
mazda joining the pro lite class for 2008 with crossworth-designed race version of the MZR engine that is used in 2.3 l displacement in champ car atlantic Championship racing
Blogged with Flock
24 million km of testing for mercedes C class
From it's digital concept development phase to production, the c class was involved in the most comprehensive testing program in the company;s history. claimed to be the 1# world production vehicle to be designed and developed based on digital prototype, computer simulation was used to developed based on digital and test the crash safety and occupant-protection system together with NVH, durability, energy management, climate control and aerodynamics
the engine was covered 24.000.000 km
the engine was covered 24.000.000 km
Blogged with Flock
Adding foresight, radar on aoutomotive
Now radar and cameras will work togetherto help driver avoid accidents,Distracted drivers seem to be having a more difficult time keeping their eyes on the road, so vehicles are begin to see where they are going.The tool is Radar. it is already gaining acceptance, and camera are being tapped to keep an eye when on the high way.
Combining the radar sensor into a safety system is not a simple task, couse radar and cameras have a different strength and weaknesses. and they must communicate to work together. Bmw X5 now has accepted the radar system for its engine.it is located a lane departure camera
Combining the radar sensor into a safety system is not a simple task, couse radar and cameras have a different strength and weaknesses. and they must communicate to work together. Bmw X5 now has accepted the radar system for its engine.it is located a lane departure camera
Blogged with Flock
Automotive Exhibition in Oil crisis in Indonesia
Yesterday i saw the tv News that In indonesia was held Automotive Exhibition, and it was held on crisis oil
Blogged with Flock
Subscribe to:
Posts (Atom)
